Schneckengetriebe mit NEMA-Flanschen

The worm gearboxes CM series are built with a completely closed aluminum die-cast housing, and supplied complete with synthetic oil for permanent lubrication. Thanks to its design, conceived for the modularity and the coupling versatility of different types of input flanges, this allows to couple IEC or NEMA motors.
Designed to work with an input speed of 3.000 rpm, they can therefore be used with brushless motors, or stepper, with different flange and shaft dimensions, even without a key.

Download PDF link

Charakteristik

Lubrication

Permanent synthetic oil long-life lubrication (viscosity grade 320) makes it possible to use the CM worm gearmotors in all mounting positions; for this reason they can be installed in any assembly position and do not require maintenance.

Ambient temperature 0 ÷ 40 °C (in the absence of freezing and condensation).
For temperature outside this range please contact our technical dept.

Radial loads

ac-vite
N2
[min-1]		 R2 [N]
CM026 CM030 CM040 CM050 CM063
187 400 674 1264 1770 2445
140 490 743 1392 1949 2692
93 580 851 1596 2234 3085
70 610 936 1754 2456 3392
56 610 1008 1890 2646 3654
47 610 1069 2004 2805 3874
35 610 1179 2210 3095 4273
28 610 1270 2381 3334 4603
23 610 1356 2542 3559 4915
18 610 1471 2759 3862 5334
14 610 1600 3000 4200 5800
 

When the resulting radial load is not applied on the centre line of the shaft it is necessary to calculate the effective load with the following formula:

Carichi Radiali - Micro motoriduttori C.C. a vite senza fine
  CM
026 030 040 050 063
a 56 65 84 101 120
b 43 50 64 76 95
R 2MAX 610 1600 3000 4200 5800
 

Toothing data

 

Worm wheel data

 Ratio
5 7.5 10 15 20 25 30 40 50 60 80 100
CM026 Z 6 4 3 2 2   1 1 1 1    
β 34° 35' 24° 41' 19° 1' 12° 57 ' 10° 30'   6° 33' 5° 17' 4° 26' 3°49’    
CM030 Z 6 4 3 2 2 2 1 1 1 1 1 1
β 27° 4' 24° 28' 18° 50' 12° 49' 10° 23' 8° 43' 6° 29' 5° 14' 4° 23' 3° 46' 2° 57' 2° 25’
CM040 Z 6 4 3 2 2 2 1 1 1 1 1 1
β 34° 19' 24° 28' 18° 50' 12° 49' 10° 23' 8° 43' 6° 29' 5° 14' 4° 23' 3° 46' 2° 57' 2° 25’
CM050 Z 6 4 3 2 2 2 1 1 1 1 1 1
β 33° 37' 24° 54' 18° 23' 12° 29' 10° 6' 8° 28' 6° 19' 5° 5 4° 15 3° 39 2° 51' 2° 20’
CM063 Z 6 4 3 2 2 2 1 1 1 1 1 1
β 34° 23' 24° 31' 18° 53' 12° 50' 10° 24' 8° 44' 6° 30 5° 14' 4° 23' 3° 47' 2° 57' 2° 25’

Efficiency

  n1
[min-1]		 Efficiency Ratio
5 7.5 10 15 20 25 30 40 50 60 80 100
CM026 2800 Rd 89 87 85 83 80   73 68 64 60    
  Rs 72 71 68 61 56   46 41 36 34    
CM030 2800 Rd 89 88 86 84 81 78 74 70 65 62 57 52
  Rs 72 67 63 55 50 43 39 35 31 27 23 21
CM040 2800 Rd 90 89 87 84 83 80 77 73 69 66 60 56
  Rs 74 71 67 60 55 51 45 40 36 32 28 24
CM050 2800 Rd 91 90 88 86 84 82 78 74 71 68 62 58
  Rs 73 70 66 59 55 51 44 39 35 32 27 23
CM063 2800 Rd 91 90 88 86 84 83 79 76 73 70 65 60
  Rs 73 71 67 60 55 51 45 40 36 33 28 24

Reversibility and irreversibility

The table below is provided for reference purposes only. It contains the various degrees of reversibility/ irreversibility of wormgearboxes in relation to dynamic Rd and static Rs efficiency.

Rd

Dynamic reversibility and irreversibility
> 0.60

Dynamic reversibility
0.50 - 0.60

Uncertain dynamic reversibility
0.40 - 0.50

Good dynamic irreversibility
<0.40

Dynamic irreversibility
Rs

Static reversibility and irreversibility
> 0.55

Static reversibility
0.50 - 0.55

Uncertain static reversibility
<0.50

Static irreversibility



Technische Daten

CM026

Download PDF link
Download PDF link
CM026
n1 = 1400 rpm
n2
[min-1]		 M2
[Nm]		 Pn1
[kW]		 i
280 13 0.44 5
187 14 0.33 7,5
140 14 0.25 10
93 14 0.18 15
70 14 0.14 20
47 15 0.11 30
35 14 0.08 40
28 13 0.07 50
23 12 0.06 60
CM026
n1 = 3000 rpm
n2
[min-1]		 M2
[Nm]		 Pn1
[kW]		 i
600 10 0.71 5
400 11 0.53 7.5
300 11 0.41 10
200 11 0.28 15
150 11 0.22 20
100 12 0.17 30
75 11 0.13 40
60 10 0.10 50
50 9 0.08 60

CM030

Download PDF link
Download PDF link
CM030 
n1 = 1400 rpm
n2
[min-1]		 M2
[Nm]		 Pn1
[kW]		 i
280 18 0.61 5
187 20 0.46 7,5
140 21 0.37 10
93 21 0.26 15
70 19 0.19 20
56 20 0.16 25
47 22 0.16 30
35 20 0.12 40
28 19 0.10 50
23 17 0.08 60
18 15 0.06 80
14 14 0.05 100
CM030 
n1 = 3000 rpm
n2
[min-1]		 M2
[Nm]		 Pn1
[kW]		 i
600 13 0.92 5
400 15 0.71 7.5
300 16 0.58 10
200 16 0.40 15
150 14 0.24 20
120 15 0.25 25
100 18 0.18 30
75 16 0.18 40
60 15 0.14 50
50 14 0.12 60
37.5 12 0.08 80
30 11 0.07 100

CM040

Download PDF link
Download PDF link
CM040 
n1 = 1400 rpm
n2
[min-1]		 M2
[Nm]		 Pn1
[kW]		 i
280 41 1.37 5
187 44 1.00 7,5
140 45 0.79 10
93 45 0.54 15
70 40 0.38 20
56 38 0.30 25
47 48 0.34 30
35 42 0.24 40
28 39 0.19 50
23 36 0.15 60
18 33 0.12 80
14 31 0.10 100
CM040 
n1 = 3000 rpm
n2
[min-1]		 M2
[Nm]		 Pn1
[kW]		 i
600 29 2.02 5
400 31 1.46 7.5
300 33 1.19 10
200 35 0.87 15
150 31 0.59 20
120 28 0.44 25
100 38 0.52 30
75 34 0.37 40
60 32 0.29 50
50 29 0.23 60
37.5 27 0.18 80
30 24 0.13 100

CM050

Download PDF link
Download PDF link
CM050 
n1 = 1400 rpm
n2
[min-1]		 M2
[Nm]		 Pn1
[kW]		 i
280 75 2.5 5
187 79 1.8 7,5
140 82 1.4 10
93 82 0.98 15
70 72 0.67 20
56 70 0.54 25
47 88 0.60 30
35 76 0.42 40
28 72 0.34 50
23 69 0.28 60
18 60 0.20 80
14 56 0.17 100
CM050 
n1 = 3000 rpm
n2
[min-1]		 M2
[Nm]		 Pn1
[kW]		 i
600 54 3.73 5
400 57 2.65 7.5
300 60 2.14 10
200 62 1.51 15
150 55 1.03 20
120 51 0.78 25
100 67 0.90 30
75 59 0.63 40
60 57 0.50 50
50 52 0.40 60
37.5 46 0.29 80
30 43 0.23 100

CM063

Download PDF link
Download PDF link
CM063
n1 = 1400 rpm
n2
[min-1]		 M2
[Nm]		 Pn1
[kW]		 i
280 134 4.4 5
187 144 3.2 7,5
140 148 2.5 10
93 154 1.8 15
70 136 1.23 20
56 135 1.0 25
47 166 1.1 30
35 142 0.74 40
28 136 0.60 50
23 126 0.49 60
18 118 0.38 80
14 116 0.33 100
CM063 
n1 = 3000 rpm
n2
[min-1]		 M2
[Nm]		 Pn1
[kW]		 i
600 97 6.70 5
400 103 4.79 7.5
300 110 3.93 10
200 115 2.80 15
150 102 1.91 20
120 94 1.42 25
100 127 1.68 30
75 112 1.16 40
60 103 0.89 50
50 97 0.73 60
37.5 87 0.53 80
30 80 0.42 100

Maße

Motorsteuerungen

Dimensioni CM con Flangia motore AS

CM026 - U - AS...

Dimensioni CM con Flangia motore AS

CM030 - U - AS...

Dimensioni CM con Flangia motore AS

CM040 - U - AS...

Dimensioni CM con Flangia motore AS

CM050 - U - AS...

Dimensioni CM con Flangia motore AS

CM063 - U - AS...

Zubehör

Options

VS - Vite sporgente

Output shaft

Torque arm