The planetary gearboxes P series have a metal body, and are supplied with a permanent grease lubrication. They are built with steel straight teeth gears and by different stages, to achieve reduction ratios from 1/4 to 1/308.
The output shaft is supported by a double ball bearing 2RS type. Designed to work with an input speed of 3,000 rpm, they can be used with brushless motors, or stepper, with different flange and shaft sizes.
Planetengetriebe mit NEMA-Flanschen
Lubrication and temperature
Planetary P gearmotors are life-time lubricated with grease, therefore they are maintenance free. They can be installed in any location. Ambient temperature 0 ÷ 40 °C (in the absence of freezing and condensation).
For temperature outside this range please contact our technical dept.
Radial loads
Ns | Radial Load R2 [N] | ||||||
---|---|---|---|---|---|---|---|
PK52 | P62 | P81 | |||||
1 | 200 | 240 | 400 | ||||
2 | 320 | 360 | 600 | ||||
3 | 450 | 520 | 1000 |
Ns | Axial Load A2 [N] | ||||||
---|---|---|---|---|---|---|---|
P52 | P62 | P81 | |||||
1 | 60 | 70 | 80 | ||||
2 | 100 | 100 | 120 | ||||
3 | 150 | 150 | 200 |
Ratios
P 52 / 62 / 81 | P 52 | P 62 | P 81 | |||
---|---|---|---|---|---|---|
Ns | in | ir | Rd | kg | kg | kg |
1 | 4 | 3.7 | 0.8 | 0.7 | 0.8 | 1.8 |
4 | 4.28 | |||||
5 | 5.18 | |||||
7 | 6.75 | |||||
2 | 14 | 13.73 | 0.75 | 0.9 | 1.2 | 2.5 |
16 | 15.88 | |||||
18 | 18.36 | |||||
19 | 19.2 | |||||
22 | 22.2 | |||||
25 | 25.01 | |||||
27 | 26.85 | |||||
29 | 28.93 | |||||
35 | 34.97 | |||||
46 | 45.56 | |||||
3 | 51 | 50.89 | 0.7 | 1.1 | 1.6 | 3.2 |
59 | 58.85 | |||||
68 | 68.06 | |||||
71 | 71.16 | |||||
79 | 78.71 | |||||
93 | 92.7 | |||||
95 | 95.17 | |||||
100 | 99.5 | |||||
107 | 107.2 | |||||
115 | 115.07 | |||||
124 | 123.97 | |||||
130 | 129.62 | |||||
139 | 139.13 | |||||
150 | 149.9 | |||||
169 | 168.84 | |||||
181 | 181.24 | |||||
195 | 195.26 | |||||
236 | 236.09 | |||||
308 | 307.54 | |||||
4 | on request |
Available 4 stages with ratio up to 2076
Technical data
Ns | ir | in | P52 | P62 | P81 | ||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Rd | Mn2 [Nm] |
R2 [N] |
Rd | Mn2 [Nm] |
R2 [N] |
Rd | Mn2 [Nm] |
R2 [N] |
|||
1 | 3.70 | 4 | 0.80 | 4 | 200 | 0.80 | 8 | 240 | 0.80 | 20 | 400 |
4.28 | 4 | ||||||||||
5.18 | 5 | ||||||||||
6.75 | 5 | ||||||||||
2 | 13.73 | 14 | 0.75 | 12 | 320 | 0.75 | 25 | 360 | 0.75 | 60 | 600 |
15.88 | 16 | ||||||||||
18.36 | 18.36 | ||||||||||
19.20 | 19.2 | ||||||||||
22.20 | 22.2 | ||||||||||
25.01 | 25 | ||||||||||
26.85 | 27 | ||||||||||
28.93 | 29 | ||||||||||
34.97 | 35 | ||||||||||
45.56 | 46 | ||||||||||
3 | 50.89 | 51 | 0.70 | 25 | 450 | 0.70 | 50 | 520 | 0.70 | 120 | 1000 |
58.85 | 59 | ||||||||||
68.06 | 68 | ||||||||||
71.16 | 71 | ||||||||||
78.71 | 79 | ||||||||||
92.70 | 93 | ||||||||||
95.17 | 95 | ||||||||||
99.5 | 100 | ||||||||||
107.2 | 107 | ||||||||||
115.07 | 115 | ||||||||||
123.97 | 124 | ||||||||||
129.62 | 130 | ||||||||||
139.13 | 139 | ||||||||||
149.90 | 150 | ||||||||||
168.84 | 169 | ||||||||||
181.24 | 181 | ||||||||||
195.26 | 195 | ||||||||||
236.09 | 236 | ||||||||||
307.54 | 308 |
Preferred ratios for sizes P52, P62 and P81. |
---|
Available 4 stages with ratio up to 2076
Motorsteuerungen
P dimensions with motor flanges AS
P52 - U - AS...
P62 - U - AS...
P81 - U - AS...
Zubehör
Output flange dimensions
P... C...
Output flanges
Output flanges | |||||||
P | a2 | b2 | c2 | e2 | f2 | s2 | Flanges |
52 | 80 | 50 j7 | 9 | 65 | 2.5 | M5 | C80 |
90 | 60 j7 | 9 | 75 | 2.5 | 5.5 | C90 | |
105 | 70 j7 | 9 | 85 | 2.5 | 6.5 | C105 | |
120 | 80 j7 | 9 | 100 | 3.0 | 6.5 | C120 | |
62 | 80 | 50 j7 | 9 | 65 | 2.5 | M5 | C80 |
90 | 60 j7 | 9 | 75 | 2.5 | 5.5 | C90 | |
105 | 70 j7 | 9 | 85 | 2.5 | 6.5 | C105 | |
120 | 80 j7 | 9 | 100 | 3.0 | 6.5 | C120 | |
81 | 90 | 60 j7 | 9 | 75 | 2.5 | M5 | C90 |
105 | 70 j7 | 9 | 85 | 2.5 | M6 | C105 | |
120 | 80 j7 | 9 | 100 | 3.0 | 6.5 | C120 |